eBMS/GigaSwitch

eBMS/Gigaswitch

Wireless monitoring & control

Batteries
• Battery for powered sensors / devices

Battery powered external sensors
• Battery powered external / industrial mounting sensor and battery

Battery powered internal sensors
• Battery powered internal CO2 sensor
• Battery powered internal space mounting temperature & humidity sensor
• Battery powered LCD thermostat with relay output, alarm levels for sensor and battery

Directional external panel antennas
• Directional wall mounting external panel antenna
• Omni-directional surface mounting external antenna
• Omni-directional wall mounting external antenna

Home energy meters
• Home energy meter (DIN mounting) 

Phase energy meters
• Commercial 3-phase / Duel 3-phase

Powered AI/DI modules
• Powered AI/DI module with 10mW repeater function
• Powered AI/DI-pulse module with 10mW repeater function

Powered multi IO module
• Battery powered IO module
• Powered multi-io module with 10mW repeater function

Remote controlled plug socket
• Remote controlled plug-in socket with energy meter

Remote relay
• 10 amp remote relay with energy meter

Thermistors
• Thermistor NTC sensor

Zigbee repeaters
• Zigbee repeater with 10mW amplifier, 12/24Vdc supply
• Zigbee repeater with 10mW amplifier, 230VAC

Diagnostic
• Handheld diagnostic tool
• Network diagnostic and monitoring application for Windows OS

Gateways
• Modbus RS232 to high powered wireless system gateway
• Modbus RS485 to high powered wireless system gateway
• Modbus TCP/ethernet to high powered wireless system gateway
• Modbus USB(RS232) to high powered wireless system gateway

The eBMS Gigaswitch is a 5 port Gigabit Ethernet switch designed for control panel mounting. The DIN mounting saves
back plate space and offers front facing ports for easy connection of cables from adjacent cable trunking.
The port supports 10/100/1000Mbps and may used in a standalone mode or as part of an eBMS IO system.

• Complies with IEEE802.3, IEEE802.3u standards.
• IEEE802.3x flow control for Full Duplex & back-pressure for half-duplex.
• MAC address auto-learning and auto-ageing

gigaswitch ethernet switch for panel mounting

Networking eBMS/IO with eBMS/Gigaswitch

The GigaSwitch can be used as part of a network of eBMS IO modules as shown.
When using a 24VDC power supply into the CON or TCP-CON as shown. If an AC power source is required, simply use the switch in Stan-Alone mode and power the switch using the terminal at the bottom and move the power selector switch to the right.

gigaswitch networking