eBMS/LTIO modules

The most cost effective IO module solution from Tyrrell Products

Wireless monitoring & control

Batteries
• Battery for powered sensors / devices

Battery powered external sensors
• Battery powered external / industrial mounting sensor and battery

Battery powered internal sensors
• Battery powered internal CO2 sensor
• Battery powered internal space mounting temperature & humidity sensor
• Battery powered LCD thermostat with relay output, alarm levels for sensor and battery

Directional external panel antennas
• Directional wall mounting external panel antenna
• Omni-directional surface mounting external antenna
• Omni-directional wall mounting external antenna

Home energy meters
• Home energy meter (DIN mounting) 

Phase energy meters
• Commercial 3-phase / Duel 3-phase

Powered AI/DI modules
• Powered AI/DI module with 10mW repeater function
• Powered AI/DI-pulse module with 10mW repeater function

Powered multi IO module
• Battery powered IO module
• Powered multi-io module with 10mW repeater function

Remote controlled plug socket
• Remote controlled plug-in socket with energy meter

Remote relay
• 10 amp remote relay with energy meter

Thermistors
• Thermistor NTC sensor

Zigbee repeaters
• Zigbee repeater with 10mW amplifier, 12/24Vdc supply
• Zigbee repeater with 10mW amplifier, 230VAC

Diagnostic
• Handheld diagnostic tool
• Network diagnostic and monitoring application for Windows OS

Gateways
• Modbus RS232 to high powered wireless system gateway
• Modbus RS485 to high powered wireless system gateway
• Modbus TCP/ethernet to high powered wireless system gateway
• Modbus USB(RS232) to high powered wireless system gateway

If price and reliability on your control and monitoring projects is your primary focus then look no further than our all-new low cost, DIN Mounting, high performance eBMS/LTIO modules.

Connected by ModbusRTU communications, these products offer the best possible performance at the lowest price. They come with freely available configuration palettes to drop onto each device, instantly bringing configuration parameters in the Niagara 4 Framework, speeding up the engineering of these modules beyond even BACnet devices.

The range has been designed with a mix of inputs and outputs to satisfy your new project requirements but also as direct low cost replacements for the JCI XT N2 module range.

Our range of eBMS/LTIO modules includes:

16UI, 6DO, 6AO