BMS Controls Peripherals: Temperature

  • Modern enclosure design
  • High contrast display for improved clarity
  • Optional fan speed and mode control

The new BAPI-Stat “Quantum” room temperature sensors feature a modern enclosure style with pushbutton setpoint adjustment and optional override. The LCD has been upgraded for higher contrast, providing improved clarity at greater distances.

The optional occupancy override can be configured in parallel with the sensor or setpoint, or as a separate output. An option 3.5mm, RJ11 or RJ22 Communication Jack can be mounted in the base to provide direct access to the network. Fan Speed and Mode Control is also available for applications with fan coils, heat pumps or air handling units.

*Different variations available, click below to view the range.

  • Modern enclosure design
  • Optional setpoint, override and communication jack
  • Wide selection of sensing elements available

Set point is available as a slidepot in various ranges. Multiple options are available including an override that can be configured to work with any controller and a communication jack with a 3.5mm pono plug style jack.

*Different variations available, click below to view the range.

  • Waterproof, double encapsulated sensor
  • 20mm long concave brass probe
  • FEP-jacketed cable in multiple lengths

The Remote Concave Probes feature a 20mm long brass encapsulation shell with a concave indention so that they fit on the outside of pipes such as condenser lines. They come with CPP-plenum or FEP-jacketed cable in 1.2m and 2.0m lead lengths.

*Different variations available, click below to view the range.

  • 10 points of calibration from 10 to 90%RH
  • Humidity only or temperature/humidity combination
  • 2% and 3% RH accuracies

Humidity control is an important aspect of any climate control system. Therefore, humidity sensors must be both accurate and dependable. BAPI’s humidity transmitters are calibrated at 10 points from 10 to 90% RH for accuracy, eliminating field calibration.

The Duct Units are also extremely dependable, featuring one of the most watertight enclosures available today. The BAPI-Box Crossover (BBX) enclosure is made of UV-resistant polycarbonate.

*Different variations available, click below to view the range.

  • Stainless steel probes: 100, 200 and 300mm
  • Double encapsulated sensors and etched teflon leads
  • Wide selection of temperature sensing elements

Single Point Duct Units feature foam backing that provides a tight seal for the probe insertion hole and absorbs vibration. Mounting tabs allow for easy installation directly to the wall of the duct.

All Duct Units have etched Teflon leadwires and double encapsulated sensors to create a watertight package that can withstand high humidity and condensation and perform under real world conditions. Duct Units have probe lengths from 100 to 300mm.

*Different variations available, click below to view the range.

  • Stainless steel probes: 100, 200, 300 and 450mm
  • Double encapsulated sensors and etched teflon leads
  • Limited Lifetime Warranty

Duct Units with a BAPI-Box Crossover come with a polycarbonate enclosure. The foam backing provides a tight seal for the probe insertion hole and absorbs vibration. Mounting tabs allow for easy installation directly to the wall of the duct.

All Duct Units have etched Teflon leadwires and double encapsulate sensors to create a watertight package that can withstand high humidity and condensation and perform under real world conditions. Duct Units have probe lengths from 100 to 450mm to accommodate most duct shapes and sizes and are available with a wide selection of sensing elements.

  • 50mm, 100mm and 200mm probe lengths
  • Series 304 stainless steel probes
  • Double encapsulated sensors and etched teflon leadwires

Immersion Units feature the BAPI-Box Crossover enclosure with hinged cover for easy field access.

Immersion Units are available in 100mm and 200mm probe lengths. The sensor is potted inside a 6.5mm stainless steel probe with thermally conductive compound.

*Different variations available, click below to view the range.

  • Quick-response sensor
  • BAPI-Box 2 enclosure
  • Well-vented sensor guard

Outside Air Units are designed to be mounted outdoors. The UV-resistant plastic shield keeps the sensor out of the sunlight and allows for excellent air circulation. The units are available in a BAPI-Box 2 polycarbonate enclosure which carries an IP66 rating.

All Outside Air Units have etched Teflon leadwires and can withstand high humidity and condensation and perform under real world conditions. This is especially important in an outside air application which can be exposed to rain, now and large temperature swings.

*Different variations available, click below to view the range.

  • Waterproof, double encapsulated sensor
  • Plenum-rated cable
  • Multiple cable lengths available

Remote Temperature Probes feature a 4mm long stainless steel probe with plenum-rated cable leads in lengths of 1.2m, 2.0m, 5.0m and 10.0m. Remote probes are commonly used in refrigerated case or strap-on applications.

They are ideal for hard-to-access areas or spaces where the usual Immersion or Duct Sensors do not fit well.

*Different variations available, click below to view the range.

  • Small, flush-mounted room temperature sensor
  • Accurate direct air measurement
  • Paintable with latex or oil base paint

The Low Profile “Button” Sensor is ideal for locations where aesthetics are as important as the temperature measurement. The inconspicuous wall sensor mounts easily by pushing through a 10mm hole and secured with a peel off tape strip. The only visible portion is a flush 22mm dot on the wall.

*Different variations available, click below to view the range.