Trend IP – Additional alarm receiver

An Alarm Receiver allows the Trend Driver to receive alarms from the Trend Controllers on the network.  This requires the Controllers to be configured to deliver alarms to the VCNC address the Trend Driver is connected to. Trend IP integration driver for Tridium Niagara 4 allows any Trend BMS to be unlocked and easily integrated into your Niagara-based system. The driver connects to an available VCNC on a Trend LAN. Once connected all controllers on the same LAN can be discovered. If multiple LANs are in use then additional Trend IP drivers should be loaded into the Niagara 4 Station. The driver supports the IQ4 / IQ3 / IQ2 / IQ1 range of devices and provides full discovery of all programmed components within. The driver supports full control of Trend Time Zones allowing a Tridium Schedule to be assigned to a single or multiple Trend Time Zones. The driver can subscribe to Trend Alarms being transmitted to the connected VCNC. Alternatively, Tridium Alarm Extensions can be used. The driver supports config mode for legacy controllers (IQ2 / IQ1) allowing the current configuration to be reviewed and updated.