2stage Relay Module


This IO module is used with DDCs to convert an analogue control output signal to a time proportional raise/lower, high/low or binary relay output. Typically it is used to control valve and damper actuators from an analogue signal.

It is designed so that every status is clearly indicated with LEDs to facilitate operation and commissioning.

Delivery in approximately 2-5 working days (subject to availability)

Download 2stage Relay Module Datasheet

SKU: SS00560R5 Category:



  • DIN Rail mounting.
  • Relay status LEDs indication.
  • Link selectable raise/lower, hi/low or binary modes and time function.
  • On/Off/Auto links for ease of commissioning.
  • Build in timing for raise/lower applications.

Product Specification

  • Input Signal: 0-10Vdc 1mA min. into 22kΩ impedance
  • Output Contacts: 8A at 230Vac (resistive load)
  • Power Supply: 24Vac ±15% @ 50Hz or 24Vdc +15%/-6%, 65mA max
  • Hysteresis: ±0.2Vdc about switching points
  • Operating Modes: Hi/Lo, Raise/Lower, Binary
  • Manual Override: On/Off/Auto jumper selectable
  • Electrical Terminals: Rising cage connectors for 0.5-2.5mm² cable
  • Operating Ambient: -10°C to +40°C, RH 0-80% non-condensing
  • Dimensions: H52mm x W62mm x D83mm
2stage Relay Module


There are no reviews yet.

Be the first to review “2stage Relay Module”

Your email address will not be published. Required fields are marked *